5 Simple Steps to Install Skirting on Your Mobile Home
Installing skirting on your mobile home creates an improvement to appearances outside of the home, and skirting protects the home from moisture, pests, and adverse weather. AAA Mobile Home Repairs understands that skirting contributes to the protection of your home's value and lifespan. If you are a homeowner looking to get into the DIY world or calling someone to be able to perform their mobile home skirting installation, this step-by-step process will direct you on how to install mobile home skirting quickly and efficiently.
Step 1: Take Measurements and Prepare the Area
Before undertaking your installation, you will need to take careful measurements. Start by measuring the perimeter of your mobile home skirting installers in Texas and the height from the ground up to the base of your home in several locations. This is important to make sure you are ordering the correct amount of skirting panels and materials.
Once you have measured it all, clear the area of dirt, rocks, and plants so that you have a clean space to work with and a level area to work with will allow for the skirting to fit properly for the best final look. AAA Mobile Home Repairs always recommends leveling out an area first to prevent gaps and misalignment when we install the skirting.
Step 2: Install the Ground Track or Base Channel
Now, position the ground track in which your skirting panels will sit. This component will keep the skirting panels secure and stable. Use a taut string as a guide, and secure the track to the ground or concrete using galvanized nails or screws.
This may seem like a simple step, but it is important. If you do a good job of installing the base track, it will make the process of installing the skirting on a mobile home much easier. That said, if you feel unsure, you may consider reaching out to professional mobile home skirting installers in Texas that can get your foundation set up properly the first time.
Phase 3 - Attaching the Skirting Panels
Now, it is time to install the panels. Cut each installing skirting on mobile home panel to the height you measured on your mobile home. To have even, smooth edges, use either tin snips or a circular saw.
Start adding panels along the ground track making sure that locks in securely. Start along the track then work your way around the home keeping the panels straight and parallel with each other. When adding panels together make sure to leave a small space for expansion, particularly if you live somewhere that experiences temperature changes like Texas.
Step 4: Attach the Top Trim or Channel
Once your panels are all secured, you'll want to put your top trim or channel in place to hold the upper edge of your installing skirting on mobile home firmly. This holds the skirting stable and also provides a finished look to your home.
The technicians at AAA Mobile Home Repairs consider this important step for proper alignment to prevent water penetration and the longevity of your repairs. A clean, well-defined trim line makes the difference between a pro or amateur look.
Step 5 of Completing Your Project
Now that the skirting is all attached, you will want to check the whole perimeter for any loose or uneven pieces of skirting. Make modifications as needed, and seal around all the edges for additional protection. You may also consider installing a vent or access panel to facilitate airflow and easy access to utilities under the home.
Finishing your mobile home skirting installers in Texas is gratifying, economical, fun, and the most important part, attention to detail; if you are uncomfortable doing it yourself, AAA Mobile Home Repairs has experienced installers across Texas that will install your skirting for you. Our highly-skilled installers use high-quality materials, provided by AAA Mobile Home Repairs, to create durable, stylish, long-lasting work.
Conclusion
Whether you are enhancing the exterior of your home or protecting it from the elements, skirting is an important renovation that contributes both function and aesthetic appeal. By implementing these steps, or working with AAA Mobile Home Repairs-Lone Star State's top mobile home skirting installation you get an incredibly clean, professional looking finish to protect and beautify your home for many years to come.
-
Mobile home skirting is a barrier that covers the open space on the lower part of your home. It is used to protect plumbing and insulation from weather and animal pests. Skirting can also make your home look better and more energy efficient.
-
Usually a full skirting installation will take around one to two days depending on the size of your home and the skirting material.
-
Yes, you can do it yourself as long as you have the right tools and materials. However, if you hire someone, like AAA Mobile Home Repairs, there will be a faster, more secure, and ultimately longer-lasting installation.
-
Popular skirting materials are vinyl, metal, or insulated panels. Vinyl skirting is less expensive and less maintenance; insulated panels offer better protection, as well as energy efficiency.
-
We recommend that you inspect your mobile home skirting every year for loose panels, cracks, or water damage. In general, you can expect to replace the skirting every five to ten years. The duration is largely dependent on the weather condition, as well as the type of material you use.